MSG_NETSCAPE4_NOT_CONNECTED=Unable to connect to Netscape. Please make sure your browser is started.
MSG_NETSCAPE6_NOT_CONNECTED=Unable to connect to Netscape 6. Please make sure your browser is started.
MSG_IE_NOT_CONNECTED=Unable to connect to Internet Explorer. Please make sure your browser is started.
MSG_BROWSERTIMEOUT=A timeout did occurred while trying to communicate with the browser.
MSG_MISCROUTINES_WRITETEXTFILE=Insufficient rights for creating ' %s '. They cannot be written at this time.
[ ... DDE related
MSG_DDE_STRINGHANDLE= Unable to get a DDE string handle for %s.
MSG_DDE_NAMINGSERVICE= Error registering the ThoughtShare DDE server with the naming service.
MSG_DDE_INITDDESERVER= Error initializing the %s DDE server.
MSG_DDE_TRANSACTION= Error executing the %s DDE transaction.
MSG_DDE_CONNECTION= Error opening a DDE connection to %s.
MSG_DDE_INSTANCEID= The DDE Instance ID is invalid.
MSG_DDE_ACCESSDATA= Error accessing the data for %s.
MSG_DDE_ADVACKTIMEOUT= Advisory acknowledgement.
MSG_DDE_BUSY= DDE server is busy.
MSG_DDE_DATAACKTIMEOUT= Data acknowledgement time out.
MSG_DDE_DLL_NOT_INITIALIZED= DDL is not initialized.
MSG_DDE_DLL_USAGE= DLL usage error.
MSG_DDE_EXECACKTIMEOUT= Execution acknowledgement time out.
MSG_DDE_INVALIDPARAMETER= Invalid parameter.
MSG_DDE_LOW_MEMORY= The system memory is low.
MSG_DDE_MEMORY_ERROR= There is not enough memory to complete the DDE operation.
MSG_DDE_NOTPROCESSED= The DDE transaction was not processed by the server.
MSG_DDE_NO_CONV_ESTABLISHED= There is no DDE conversation established.
MSG_DDE_POKEACKTIMEOUT= Poke acknowledgement time out.
MSG_DDE_POSTMSG_FAILED= The DDE post message failed.
MSG_DDE_REENTRANCY= DDE reentrancy.
MSG_DDE_SERVER_DIED= The DDE server is dead.
MSG_DDE_SYS_ERROR= DDE system error.
MSG_DDE_UNADVACKTIMEOUT= Unadvise acknowledgement time out.
MSG_DDE_UNFOUND_QUEUE_ID= Unfound queue id.
MSG_OPENURL= Error trying to open URL using %s: %s.
MSG_UNEXPECTED= Unexpected error: %s.
MSG_BROWSERNOTCONNECTED= The web browser is not connected.
MSG_IEXPLORERNOTCONNECTED=Internet Explorer is not running.
MSG_BROWSERTYPENOTSET= You must set the web browser type before being able to access web browser functions.
MSG_BROWSER_ERRORSETTINGTYPE= Error writing the browser type.
MSG_BROWSER_ERRORGETTINGTYPE= Error reading the browser type.
MSG_PULLINGMODE= The pulling mode is only available with the Netscape.
MSG_URLQUEUE_NOT_ASSIGNED= Incoming URL queue has not been created/assigned.
MSG_DS_REPORT=Please report this to ThoughtShare Support: support@thoughtshare.com
MSG_DS_CANNOT_DELETE_RECORD= Cannot delete record. Out of Bounds Error.
MSG_DS_NO_FILE_NAME= No filename specified to load/save.
MSG_DS_FILE_DOES_NOT_EXIST= File %s does not exist.
MSG_DS_UNABLE_TO_PARSE_XML_FILE= Unable to parse XML file %s.
MSG_DS_UNABLE_TO_CREATE_DIR= Unable to create directory %s.
MSG_DS_ERROR_UNPACKING_BUZFILE= Problem decompressing file: %s.
MSG_DS_SUMMARY_ERROR_PACKING_BUZFILE=Problem compressing %s file. File in use or disk full.
MSG_DS_SUMMARY_READONLY_FILE=The "%s" file is a Read Only file, and cannot be overwritten!
MSG_DS_DETAILS_READONLY_FILE=The application is protecting your document from losing the buzPAK. If you would like to overwrite the file anyway, please use Windows Explorer to remove the Read Only setting from the file.
MSG_DS_DETAIL_ERROR_PACKING_BUZFILE=The file may be in use by another application or there may be insufficient disk space. Try saving the file with a different file name or in another location.
MSG_DS_REPORT_CANNOT_DELETE_DIR=Cannot delete directory: %s '%s' %s It may currently be in use. %s Before starting the Client application again, please delete it manually. %S
MSG_DS_FILE_IN_USE=The file "%s" is either ReadOnly or in use by another application. Modifications will need to be saved to a different file name or another location.
MSG_DS_DETAIL_FILE_IN_USE=This file could not be locked so it is probably ReadOnly or in use by another application. You can still edit this file but the changes will need to be saved using a different file name or in another location.
MSG_DS_CANNOT_COPY_DIR= Cannot Copy directory: %s to directory %s.
MSG_DS_WEBDESK_DIR_EXISTS= buzPAK (%s) working directory already exists. buzPAK may already be open.
HINT_WEBDESK_MAPFORM_TAB=The Map tab both displays the buzPAK, and enables you to create and edit it
HINT_WEBDESK_PATHFORM_TAB=The BeeLine tab is where you create the Tour.
HINT_WEBDESK_NOTESFORM_TAB=The Notes tab is where you enter and view the text and attachments of buzPAK notes and messages
HINT_WEBDESK_SEARCHNOTESFORM_TAB=The Search Note tab allows you to search through the notes in a buzPAK by using keywords
MSG_NEWER_BUZPAK=This buzPAK was created by a later version of ThoughtShare. For a free upgrade of ThoughtShare go to: http://www.thoughtshare.com
MSG_OLDER_BUZPAK=This buzPAK was created with an older version of ThoughtShare. It will be loaded on a best effort basis. Some data may be missing from the older file format.
MSG_SKIN_NOT_FOUND=The %s skin was not found. Therefore, the previosly selected skin will be used.
MSG_SKIN_CANNOT_CREATE_DIR_INFO=Cannot create the skin working directory.
MSG_WEBDESKCONTAINER_SENDEMAIL_MAPI_EXCEPTION=An exception occurred while sending your email.
MSG_SENDPOST_MISSING_MAIL_HOST=You must complete all the fields in the "Edit/Application Settings/User/Mail" section to enable buzPAK emailing or posting.
MSG_SEND_ERROR_SENDING=Failure in mailing.
MSG_SEND_BAD_ADDRESS=Send to address invalid.
MSG_SEND_BAD_MAILNAME=The mail address: '%s' is invalid.
MSG_SEND_ADDRESSBOOK_FORM_NOT_CREATED=Form "Form_AddressBook" not created.
MSG_SEND_POSTSERVER_FILE_SAVE_INFO=Could not save to the "PostServer.txt" file.
MSG_SEND_ADDADDRESS_FORM_NOT_CREATED=Form "Form_AddAddress" not created.
MSG_SEND_MISSING_SEND_TO=Cannot send email without a send to address. Please enter a send to address.
MSG_SEND_MISSING_SUBJECT=It is strongly recommended you send the email with the subject line completed. Would you like to send the message without a subject?
MSG_SEND_NO_SUBJECT=[No Subject]
MSG_SEND_ADDRESSBOOK_FILE_MANAGE_PROBLEM=There are reading/writing problems with the "%s" AddressBook resource file.
MSG_SEND_ADDRESSBOOK_FILE_SAVE_PROBLEM_INFO=Could not save the AddressBook.txt file.
MSG_SEND_ADDRESSBOOK_FILE_LOAD_PROBLEM_INFO=Could not load and save the AddressBook.txt file.
MSG_POST_POST_SERVER_FILE_MANAGE_PROBLEM=There are reading/writing problems with the "%s" Post-Server resource file.
MSG_POST_MISSING_ADDRESS=The Address field must be completed.
MSG_POST_ADDRESS_TO_SAVE_ALREADY_EXIST=The address: %s already exists. Do you want to replace the existing address?
MSG_POST_FAILED_DETAILS=PlanBee may have been unable to post for the following reasons: %s * Unable to email the buzpak. %s Please make sure your email client is configured correctly. %s * A buzpak of the same name is in bExchange, and you have not checked it out. %s Please make sure you check the buzpak out from bExchange prior to modifying it and posting it back in.
MSG_INTRANET_POST_SUCCESS=Post Succesful!
MSG_ABORT_POST=Do you want to abort this Post?
MSG_POST_FAILED=PlanBee was unable to post "%s" to bExchange on "%s".
MSG_ADDRESSBOOK_ASKDELETEADDRESS=Are you sure you want to delete "%s" from your Address Book?
MSG_ADDRESSBOOK_FIND_ADDRESSBOOK_END=Continue the search from the beginning of the address book?
MSG_ADDRESSBOOK_FIND_ADDRESSBOOK_FINISHED=The Client has finished searching the address book!
MSG_ASK_DELETE_SERVER=Are you sure you want to remove this Server entry?
MSG_MISSING_SERVER_NAME=The Server Name or URL fields cannot be blank.
MSG_GUI_INVALID_ITEM_PARENT= The parent of the item is invalid.
MSG_EXCEPTION_TYPE_SILENT=SILENT
MSG_EXCEPTION_TYPE_HINT=HINT
MSG_EXCEPTION_TYPE_WARNING=WARNING
MSG_EXCEPTION_TYPE_ERROR=ERROR
MSG_EXCEPTION_TYPE_CATASTROPHIC=CATASTROPHIC
MSG_COMMONROUTIN_BITMAP_NOT_LOADED=Cannot load the "%s" bitmap.
MSG_ERR_DIALOG_LABEL_HINT=The application has encountered a HINT error.
MSG_ERR_DIALOG_LABEL_WARNING=The application has encountered a WARNING error.
MSG_ERR_DIALOG_LABEL_ERROR=The application has encountered a ERROR exception.
MSG_ERR_DIALOG_LABEL_CATASTROPHIC=The application has encountered a CATASTROPHIC error,
MSG_WEBDESK_BADDELSAVEBACKUP=Cannot delete or rename the backup file.
MSG_WEBDESK_BADBACKUPMANAGEMENT=You may have not enough space on the disk to save the backup file.
MSG_DIR_DOES_NOT_EXIST=Directory "%s" does not exist. The directory and its associated files are needed for the application to run.
[Warnings]
MSG_WARNING_SKIN_BAD_DEFAULT_DIR=You cannot change the directory for skins. Please copy all skins into the %s directory.
MSG_WARNING_FILE_ALREADY_EXIST=The file "%s" already exists. Do you want to replace the existing file?
MSG_WARNING_REVERT_FILE=Do you want to revert to the saved "%s" filter?
MSG_WARNING_DEF_EMAIL_SUPORT_MAPI_SUMMARY=Please ensure that your default email client supports MAPI and is properly configured.
MSG_WARNING_DEF_EMAIL_SUPORT_MAPI_DETAILS=MAPI is a standard email protocol supported by many email clients. You may have to enable MAPI on your email client before it will work properly. %s %s ex: If you are using Netscape email: %s 1. Close the PlanBee application %s 2. Look in the menus under Edit/Preferences/Mail & Newsgroups %s 3. Make sure that the checkbox beside "Use Netscape Messenger from MAPI %s based applications" is checked.
MSG_WARNING_FILTER_FILE_NOT_FOUND=The filter file: "%s" was not found. %s You will have no filter selected.
MSG_WEBDESKPREFERENCES_WEBDESK_NIL=Internal data problem. %s buzPAK preferences form called without buzPAK selection.
MSG_WEBDESKPREFERENCES_WEBDESK_NIL_INFO=buzPAK is NIL.
MSG_WARNING_DEFAULTPATH=The tour will be deleted, do you want to continue?
MSG_WEBDESK_BADDELSAVEBACKUP=Problems at backup file management.
[ ...SKIN-SELECT]
MSG_MESSAGE_SKINSELECT_BADSKINNAME=The given skin name is not correct. %s It must not contain the following characters: \/:*?"<>|.,
MSG_WARNING_FILTEREXPORT_OVERWRITEFILTER=There is already a filter with this name: "%s". %s Would you like to replace the existing filter?
MSG_WARNING_SKINSELECT_OVERWRITESKIN=There is already a skin with this name "%s". %s Would you like to replace the existing skin?
[ ...Open dialogs]
MSG_PREFERENCE_FILTER_LNG_EXTENSION=ThoughtShare Language files(*.LNG)|*.LNG;
MSG_PREFERENCE_FILTER_XML_EXTENSION=ThoughtShare Skinlist in XML files(*.XML)|*.XML;
CAPTION_AUTHORNAME_DESC=NOTE: This item is only stored in buzPAKs to identify its author and is not used as registration information. The author name may be changed at anytime from the 'Application Settings' dialog.
MSG_STARTUP_ERR=Problem with the creation of the Start-up form.
MSG_LOW_BITDEPTH_PART1=Your video display is currently in
MSG_LOW_BITDEPTH_PART2=-bit color mode. You should switch to 16-bit color or higher for best viewing. If you cannot use a higher color mode, you may want to use the 'Default 256' skin. (click Details for instructions)
MSG_LOW_BITDEPTH_DETAILS=To change your color mode : Exit from all instances of PlanBee, Click [Start/Settings/Control Panel], Double-click [Display], Click [Settings] tab, Choose a higher color mode from the [Colors] list. To use the 'Default 256' skin: From PlanBee, Click the [Edit] menu, Select [buzPAK Preferences], Click the [Skin] tab, Click the [Select] button in the [Select New Skin] group, Click the 'Default 256' list item, Click [OK], Click [OK] again. Now, from the [File] menu, Click [Close].
[form: SEARCH-NOTES]
MSG_SEARCHNOTES_HTML_MESSAGE=For search, please fill the above search-key line.
MSG_SEARCHNOTES_HTML_TITLE=NoteSearch Results
MSG_SEARCHNOTES_NO_MATCHES_FOUND=There are no matches found.
MSG_NOTES_MULTIPLEADS=Order of selection of messages is not guaranteed. If you want to preserve the order use single select.
MSG_NOTE_OPEN_DIALOG_TITLE=Select Attachment
MSG_ATTACHMENTS_ALREADY_EXISTS=Warning! A file with the name "%s" already exists as an attachment.
MSG_ATTACHMENTS_ALREADY_EXISTS_ADV=Warning! A file with the name "%s" already exists as a message.
CAPTION_ATTACHMENTS_NOTENAME=Note Name: "%s"
CAPTION_ATTACHMENTS_COLTITLE_FILENAME=File Name
CAPTION_ATTACHMENTS_COLTITLE_NOTENAME=Note Name
CAPTION_ATTACHMENTS_COLTITLE_NOTEOWNERNAME=Node
MSG_ATTACHMENTS_LIST=List of existing attachments.
MSG_ATTACHMENTS_LISTADV=List of existing messages.
CAPTION_ATTACHMENTS_NEWNAME=New attachment name:
CAPTION_ATTACHMENTS_NEWNAMEADV=New message name:
MSG_ATTACHMENTS_REPLACE=Do you really want to replace the attachment "%s" with this file?
MSG_ATTACHMENTS_DELETEALL=Do you really want to delete the message manager and all its messages?
MSG_ATTACHMENTS_NOTHTMLFILE=The File "%s" is not an HTML file, please rename it.
CAPTION_ATTACHMENTS_RENAMETO=Rename Attachment to:
CAPTION_ATTACHMENTS_RENAMEADVTO=Rename Message to:
MSG_ERROR_COPY_FILE=Error copying file "%s" into file "%s"
MSG_ERROR_RENAME_FILE=Error renaming file "%s"
CAPTION_OBJECTTYPE_WEBDESK=buzPAK
CAPTION_OBJECTTYPE_GROUP=Group
CAPTION_OBJECTTYPE_ITEM=Item
MSG_CONV_ROUTINES_BAD_TCOLOR=Error at conversion of TColor to Hexadecimal number. Bad TColor number.
MSG_CONV_ROUTINES_BAD_TCOLOR_INFO=Bad TColor number format.
MSG_CONV_ROUTINES_BAD_HEXCOLOR=Error at conversion of Hexadecimal number to TColor number. Bad Hexadecimal number.
MSG_CONV_ROUTINES_BAD_HEXCOLOR_INFO=Bad Hex number format for the Color.
MSG_SKINCTL_INVALID_EMBEDDED_SKIN=Invalid Embedded Skin "%s" - Program will use Default Skin "%s" instead.
MSG_SKINCTL_SKIN_NOT_INSTALLED=Skin "%s" not Installed - Program will use Default Skin "%s" instead.
MSG_MAP_CANNOT_MAXIMIZE=This group cannot be maximized, please move it before maximizing it.
TOOLTIP_SHORT_SENDEMAIL=Email buzPAK
TOOLTIP_LONG_SENDEMAIL=Email the current buzPAK
TOOLTIP_SHORT_SENDPOST=Post buzPAK
TOOLTIP_LONG_SENDPOST=Post the current buzPAK
TOOLTIP_SHORT_CAPTUREURL=Capture URL
TOOLTIP_LONG_CAPTUREURL=Capture the current URL in the buzPAK
TOOLTIP_SHORT_FIRST=Start
TOOLTIP_LONG_FIRST=Go to the first item in the tour
TOOLTIP_SHORT_LAST=End
TOOLTIP_LONG_LAST=Go to the last item in the tour
TOOLTIP_SHORT_PREVIOUS=Previous
TOOLTIP_LONG_PREVIOUS=Go to the previous item in the tour
TOOLTIP_SHORT_NEXT=Next
TOOLTIP_LONG_NEXT=Go to the next item in the tour
TOOLTIP_SHORT_SENDRECEIVEMODE=Auto Capture mode
TOOLTIP_LONG_SENDRECEIVEMODE=Auto Capture: Click to switch to Capture On Demand mode
TOOLTIP_SHORT_SENDMODE=Capture On Demand mode
TOOLTIP_LONG_SENDMODE=Capture On Demand: Click to disconnect
TOOLTIP_SHORT_DISCONNECTEDMODE=Disconnected
TOOLTIP_LONG_DISCONNECTEDMODE=Disconnected: Click to switch to Auto Capture mode
MSG_POSTING_UPDATE=Error updating posting status.
MSG_POSTING_INVALIDQUERY=The URL query received is invalid for %s posted to %s.
MSG_POSTING_INVALIDCOMMAND=The command received is invalid: %s.
MSG_POSTING_REPOST=The posting server did not reply. Do you want to retry the posting?
MSG_POSTING_INPROGRESS=There is already a posting in progress.
MSG_NOT_A_BUZ_FILE=You did not select a '*.buz' file. buzPAK must have a BUZ extension
MSG_SUMMARY_BUZPAK_CURRENTLY_OPEN=buzPAK "%s" is Currently Open
MSG_DETAILS_BUZPAK_CURRENTLY_OPEN=You have tried to save buzPAK "%s" over a buzPAK that is already open in another buzPAK. Request to Save has been cancelled.
MSG_SUMMARY_BUZPAK_CURRENTLY_OPEN_DIFF_DIR=buzPAK "%s" is currently open from another directory.
[ MSG_TEXT - To be used for Literal String Conversion ]
MSG_TEXT_VERSION=Version
MSG_INVALID_MAP_FILENAME=TSMAP_# is a reserved file name. Please save with another name.
[Help File Messages]
MSG_HELP_FILE_NOT_FOUND=The Help File "%s" cannot be found.
MSG_SUMMARY_ADD_TO_DEFAULT_FILTERS=Do you want to add this to the Default Filter Set?
MSG_DETAIL_ADD_TO_DEFAULT_FILTERS=You have selected to add a Domain or URL suffix to your buzPAK filter. However, this will only add it to the filter for this buzPAK. To add it to the filter for all new buzPAKs - click the 'Yes' button above.
MSG_SUMMARY_ADD_HTM_TO_FILTERS=Are you sure you want to add "%s" to your filter set? This will prevent the client from capturing all HTML pages.
MSG_DETAIL_ADD_HTM_TO_FILTERS=If you filter out all urls that end in "%s", then this will filter out a large percent of all web pages and probably content that you want to capture.
CAPTION_PROPERTIES_LASTAUTHOR_LABEL=Last Active Author:
CAPTION_PROPERTIES_LASTSAVEDDATE_LABEL=Last Date Saved:
[IMPORTANT!!!!!! UP TO HERE THE ENGLISH FILE HAS BEEN REVIEWED]
[ANYTHING FROM THIS POINT ON NEEDS TO BE CHECKED]
SERVER_LIST_INSTRUCTION=No Servers in list
MSG_ADV_IMAGESNOTAVAILABLE=The message: "%s" cannot be added
MSG_ADV_IMAGESNOTAVAILABLE_DETAIL=Please check that all the required images are on the same directory as the message file
MSG_SUMMARY_ERROR_PRINTING_NOTES=An error occurred while printing the notes.
MSG_DETAIL_ERROR_PRINTING_NOTES=The error may be caused by not having a default printer defined.
[The MSG: MSG_DS_REPORT_CANNOT_DELETE_DIR is not longer used]
MSG_CANNOT_DELETE_DIR=Directory "%s" cannot be deleted.
MSG_CANNOT_DELETE_DIR_DETAILS=The directory may be in use. The next time the application starts the directory will be deleted.
MSG_SUMMARY_MAIL_ERROR=An error occurred while sending the buzPAK via Email.
MSG_DETAIL_MAIL_ERROR=The error may have been caused by an invalid email address or an invalid email server (see Application Settings - User Tab). Or perhaps your email server is not functioning at this time.
MSG_WD_SAVE_ATTACHMENTALREADYOPEN=The attachment: "%s" is open. If you modify the attachment after saving the map, the changes to the attachments are going to be lost, unless you save the map again.
MSG_WD_SAVE_FAILURE=The file "%s" could not be saved. The file may be read-only, locked by another application, or there is not enough free disk space.
MSG_WD_CLOSE_ATTACHMENTALREADYOPEN=The attachment: "%s" is open. Cannot close the Map: "%s"
MSG_WD_CLOSE_ATTACHMENTALREADYOPEN_DETAILS=Please close any open attachments, and try the operation again.
MSG_SUMMARY_SAVEAS_FILE_EXISTS=The file "%s" already exists. Do you want to overwrite?
MSG_CAPTUREERROR=An error occurred while trying to capture the URL. Please try reconnecting to the browser.
MSG_OPENURLERROR=An error occurred while trying to navigate to a URL. Please try reconnecting to the browser.
[for James]
MSG_ADDADDRESS_EMPTYNICKNAMEORADDRESS=You must provide both a Nickname and email addres to save an entry in the Address Book.
MSG_ADDADDRESS_NICKNAMEALREADYEXIST=The Nickname has to be unique and the given nickname already exists in the Address Book.%s Please give another Nickname.
MSG_DS_LOAD_UNABLETOOPEN=Unable to load buzPAK: "%s"
MSG_NODEDRAW_ERROR=An error did occurred while drawing node id#%d.
MSG_SCALING_ERROR=An error did occurred while scaling bitmaps: %s. srcWidth:%d, srcHeight:%d, dstLeft:%d, dstTop:%d, dstWidth:%d, dstHeight:%d, dstMaxWidth:%d, dstMaxHeight:%d.
MSG_WEBDESKDRAW_ERROR=An error did occurred while drawing the buzPAK.
MSG_FILETOOLONG=The file name "%s" exceeds the maximum of %s characters that a filename can have (including path). Please choose a shorter name.
MSG_DS_ERROR_WRITINGDEFAULTFILTER=Error modifying the Default Filter file
MSG_DS_ERROR_WRITINGDEFAULTFILTER_DETAILS=More likely the default filter: "%s" is a Read-Only file.
MSG_DS_SUMMARY_NO_SUFFIX_TO_ADDTO_DEFAULT_FILTERS=There is either no valid suffix to add on this web page or it is already added to the filter
MSG_DS_DETAIL_NO_SUFFIX_TO_ADDTO_DEFAULT_FILTERS=Some URLs do not contain regular suffixes such as .htm or .jpeg. In these cases the client cannot automatically determine what should be added to the filter. However, you can still add the entry manually. See help for more information.
MSG_DS_SUMMARY_NO_DOMAIN_TO_ADDTO_DEFAULT_FILTERS=There is no domain to add from this group or this domain is already added to the filter
MSG_DS_DETAIL_NO_DOMAIN_TO_ADDTO_DEFAULT_FILTERS=Under certain circumstances the client is not able to correctly parse the domain from the URL. In these cases the client cannot automatically determine what should be added to the filter. However, you can still add the entry manually. See help for more information.
MSG_NETSCAPEBUSY_ERROR=Netscape is busy. Try again.
MSG_CANNOT_OPEN_NOTE_FILE=Cannot Open Note File: "%s"
MSG_CANNOT_OPEN_NOTE_FILE_DETAILS=There was an error scanning the Note file. Please try the search again. If the problem persists please report it to ThoughtShare.
MSG_ASCREEN_CLOSE=&Continue
MSG_ASCREEN_DONT_SHOW_AGAIN=Don't Show Again
MSG_ASCREEN_CANT_LOAD_GETSTARTRTF=Cannot load the '%s' file.
MSG_IE_NOACTIVEINSTANCE=There is not active Internet Explorer instance.
MSG_IE_INTERFACEERROR=Error getting a reference to the IE COM interface.
MSG_IE_DOCUMENTERROR=Error getting a reference to the IE Document interface.
MSG_SENDEMAIL_SUBJECT=[buzPAK - '%s']
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT1=You have received a buzPAK created in PlanBee.
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT2=To view the buzPAK, download your FREE copy of PlanBee at
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT3=http://www.thoughtshare.com/downloads and see for yourself
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT4=why ZDNet gave PlanBee a 5 Star rating.
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT5=PlanBee(tm) is a revolutionary personal Web companion that lets
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT6=users capture the information they want as they work the Web,
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT7=and organize and combine it with their own thoughts and attachments
MSG_SENDPOST_MAIL_ATTACHED_INFOTEXT8=into a package of visual information called a buzPAK (tm).
MSG_NOT_ENOUGH_SPACE_ON_DRIVE=There might be not enough space on the destination drive!
[ TSPClipBoard Messages ]
MSG_TSPCLIPBOARD_PASTE_DUPLICATED_URL=The following URL already exists "%s"
MSG_TSPCLIPBOARD_PASTE_DUPLICATED_URL_DETAILS=Cannot paste items and/or groups with URLs equal to the URLs of existing items or groups.
MSG_LOGURLERROR=An error did occurred with the url logging feature: %s.
CAPTION_ACTION_NOTE_HIDETOOLBAR=&Hide ToolBar
CAPTION_ACTION_NOTE_SHOWTOOLBAR=S&how ToolBar
MSG_INVALID_FILENAME="%s" is an invalid file name.
MSG_LOWRESOURCES_FIRST_MESSAGE=Insufficient system resources to run PlanBee. Please shut down other applications currently running and try again.
MSG_LOWRESOURCES_ADDITION_MESSAGE=Insufficient system resources to open a new PlanBee window. Please shut down other applications currently running and try again.
MSG_LOWRESOURCES_DETAILS=Due to system resource management under Windows 95/98/ME, you must shut down one or more application windows. If that does not solve the problem you may have to restart Windows.
MSG_NOTENOUGH_FREEDISKSPACE_MESSAGE=You may not have enough disk space to run the application.
MSG_NOTENOUGH_FREEDISKSPACE_DETAILS=To run PlanBee you must create more free disk space on the "%s:\" drive.
MSG_OPENFILE_CONFIRM_MESSAGE=Opening %s : Are you sure you want to open this file?
MSG_OPENFILE_CONFIRM_DETAILS=WARNING : Files may contain viruses or scripts that can be harmful to your computer. It is important to be certain that this file is from a trustworthy source.
MSG_OPENFILE_FAIL_GENERAL=Could not open %s
MSG_OPENFILE_FAIL_GENERAL_DETAILS=This file may currently be in use by another program, is no longer on your computer, or is an unknown file type.
MSG_BROWSERNAVERROR=The browser is busy. Try navigating slower.
CAPTION_NOTES_DEFAULT_SUMMARYNOTE_NAME=Summary
CAPTION_NOTES_DEFAULT_SUMMARYNOTE_TEXT=Summary:
CAPTION_FORM_WEBDESKNAME=buzPAK: "%s" - %s
CAPTION_MESSAGE_MANAGER_SHOWNEXTTIME=Don't show this message next time.
MSG_ERROR_COPY_FILE_DETAILS=Please check the file names are correct, there is enough free space on your hard drive and the disk is not write protected.
MSG_CLIPBOARD_CANNOTCOPY=Cannot copy the selected groups/items, please make sure there is enough space in your hard drive.
MSG_CLIPBOARD_PASTEINCOMPLETE=Cannot complete the paste operation.
MSG_DS_ERROR_SAVE_ATTACHMENT=Cannot save attachment file "%s".
MSG_ERROR_COPY_NOTE_FILE=Error copying note text file "%s" into file "%s"
CAPTION_ACTION_HELP_VISITSUPPORT=Visit &Online Support Forums
MSG_CAPTUREINCOMPLETEDETAIL=PlanBee was not able to capture every frame in the website because of HTTP security restrictions. You must activate Auto Capture Frames (for more information see, Adjust the Display in PlanBee's online help). You must then leave and revisit the website in Auto Capture mode.
MSG_CAPTUREINCOMPLETE=PlanBee could not capture every frame displayed.
MSG_POSTING_SERVERFILERROR=Unable to update the PostServers.txt file.
MSG_PROPERTIES_DUP_URL_SUMMARY=Entered URL is a duplicate of an existing item/group
MSG_PROPERTIES_DUP_URL_DETAIL=Duplicate URLs are not allowed in a buzPAK. The only duplicate that is allowed is '' (Blank)
CAPTION_ACTION_EDIT=&Edit
CAPTION_ACTION_NOTES=&Notes
CAPTION_ACTION_CONNECTION=&Connection...
CAPTION_MENUITEM_MAP=&Map
CAPTION_MENUITEM_BEELINE=&BeeLine
CAPTION_MENUITEM_GROUP=Highlighted G&roup
CAPTION_MENUITEM_ITEM=Highlighted &Item
CAPTION_MENUITEM_TMAPLINK=Highlighted &BuzPAK Link
CAPTION_MENUITEM_SELECTED=&Selected
TOOLTIP_SHORT_SITELINK=Goto the buz Zone
TOOLTIP_LONG_SITELINK=Goto the buz Zone
MSG_MENUITEM_CONNECTION=Right-click the connection you want to modify.
MSG_MENUITEM_CONNECTION_DETAILS=The operations for connections are not available from the edit menu, please right-click on the connection you want to modify and a popup menu will appear.
MSG_BROWSERLOADLONG=Unable to automatically connect with the browser.
MSG_MAP_CANNOT_DRAGANDDROP_DIR=Cannot drag & drop the directory(ies) %s. Please use files only.
CAPTION_ITEMS_COLTITLE_FILENAME=File Name
CAPTION_ITEMS_COLTITLE_ITEMNAME=Item Name
MSG_ITEMFILE_ALREADY_EXISTS=Warning! An item already has an embedded file called "%s". If you want to add the file you must rename it.
CAPTION_ITEMFILE_RENAMETO=Rename Embedded File to:
MSG_FILE_REPLACE=Do you really want to replace the file "%s" with this file?
HINT_HOT_SPOT_ZOOM=Ctrl + Left-Click to Zoom Group
MSG_DS_ERROR_SAVE_EMBEDDEDFILE=Cannot save embedded file "%s".
CAPTION_ACTION_ITEM_SAVEAS=Save As
MSG_SAVE_DIALOG_TITLE=Save File
MSG_SUMMARY_REGISTRATION=Would you like to register PlanBee for free?%sRegistered users receive technical support, notification of new versions, tips, and example buzPAKs.
MSG_DETAIL_REGISTRATION=All information gathered during the registration process will be kept confidential and not shared with any other entities. Please see our web site for more detailed information: http://www.thoughtshare.com/privacypolicy.jsp
CAPTION_UNDO_CREATION=Undo Create
CAPTION_UNDO_ITEMCREATION=Undo Item Creation
CAPTION_UNDO_GROUPCREATION=Undo Group Creation
CAPTION_UNDO_TMLINKCREATION=Undo buzPAK Link Creation
